General Wire Sizing Charts
An IMWK (Inter-Module Wiring Kit)
is designed to connect modules together that are on
the same mount, side by side.
How do I Select the Right IMWK?
On the chart below, select the modules
that you are using or purchasing and the corresponding
IMWK part number that is listed to the left.
| Part
# |
Length |
Fits
Module Part # |
| IMWK-18 |
18" |
SX-20-U
SX-60-U
SX-30-U SX-65-U
SX-40-U SX-75-U
SX-50-U SX-80-U
SX-55-U SX-85-U |
| IMWK-20 |
20" |
BP-275-U
BP-585
SX-75-TU
MSX-120
SP-75 |
| IMWK-27 |
27" |
SX-110-U
SX-120-U |
| IMWK-29 |
29" |
US-42
US-64 |
What does the OPWK Model Number
Mean?
OPWK stands for Output Wiring Kit.
The first number immediately following "OPWK" is
the gauge of the wire. For example, an OPWK10-20
is a 10 gauge wire. The second number represents
the length of the wire in feet. To keep with the
same example, the OPWK10-20 is 20 feet long.
How do I Select the Right OPWK?
Click
here for the OPWK wire sizing chart.
How do I read the OPWK wire
sizing chart?
- Select the highest number of amps to be run through
the cable. Always round this value up.
- Select the maximum length that the cable will
need to be by following the chart to the right.
- Refer to the number above the column that your
necessary length is in for the recommended wire
gauge.
- Make sure to look this up under the correct voltage.
The chart shows both 12 Volt and 24 Volt. If this
chart does not help you in selecting an OPWK, Contact
us at
Battery Cable Selection
Chart
|
